Showing posts with label flash. Show all posts
Showing posts with label flash. Show all posts

Monday, July 27, 2015

Rush, Rush, Rush...

No, not the famous Canadian trio of Geddy Lee, Neil Peart & Alex Lifeson (although they are awesome !). Rushing is the bane of the amateur photographer ! In this day of digital photography, it is way too easy to hurry and not think about setting up your shot.

For example, look at these two photos:

This one has the white balance set for a sunny afternoon, about 5000 degrees Kelvin. See how yellow it looks ? I look like I have jaundice or something !

 

This photo has had the white balance corrected to indoor, flourescent lighting, about 3200 degrees Kelvin. Notice how it looks a quite a bit lighter, and more natural ?

 

 

 

 

 

In fact, both photos were taken with flash & a 1/2 Green gel to compensate for the lighting. But because I had the white balance set up wrong - because I was rushing - all the photos were like this. Thanks goodness it was an easy thing to correct in post-processing !

Note to self - Stop. Check EVERY setting before looking through the lens...

 

Friday, May 9, 2014

Project365 - Manipulating Light with Gels

Introduction
I really should stop calling this a 365 Project - we've been so busy moving and settling into the new house that I really haven't been able to make time to shoot. I will do my very best to get back to shooting regularly, if not every day !

Pat taught me how to make jam over the past few days. On the first evening, we made ten jars of strawberry jam. I thought it would make a colourful subject for this blog, so I documented the process. The second evening, we made bumbleberry jam. This time I slowed down & thought about what I was doing. I made two changes between the first & second nights.

The Setup

Day 1 - I shot handheld, with my Canon 60D. I wanted a fast lens, so I used my Canon 40mm f2.8 lens, and mounted my Canon 430 EX II flash in the hotshoe.

Day 2 - still handheld with the 60D, but with my Canon 24-105mm f/4 L lens instead. I mounted the flash in the hotshoe, but added a half-density orange gel to correct for the incandescent lighting.

Let's see how the pictures look !

The Photos

Day 1 - no gel:

Here is Pat, cooking the strawberry jam. It's bubbling away so hard, it looked molten ! Notice the yellowish tinge in the appliances & her shirt ! That's the incandescent lighting.

 

 

 

Here we see the yellow tinge, but more pronounced.





Day 2 - 1/2 CTO Gel on the flash

In this photo, the colours are correct. The whites are white - not cream, and the strawberry jam is a brilliant red.

 

 

 

Did I mention we made a dozen jars ? ;-)

 

 

 

 

Lessons Learned

Once again, I need to remember to slow down & plan my shoots. The photos turn out much better when I think through all the components - especially when I think about light temperature !

 

Sunday, April 13, 2014

Project365 - Of Grids and Snoots

Introduction
I managed to collect the components of my Honl speed strap & gels system yesterday. They also make a grid, so I picked one of this up up as well. Grids & Snoots are another form of light modifier for your flash system. They don't change the colour temperature of your flash, instead they focus the beam.

Why would you want to do that ? It allows the photographer to more selectively light the scene. Imagine a photo of a model in a dark room. Perhaps you want to expose the background to look like a black backdrop. That's easily achieved, but you still need to light up the model, to show off contrast and colour. The grid or snoot will help "aim" the light at the models face, while minimizing the spillover onto the background.

 

The Setup

These are some more "goofing around" shots. None of my available models were out of bed yet, and I was getting impatient. A very simple setup, with the Honl 1/8 grid attached to the Canon 430 EX II via the Honl speed strap. The whole shebang is mounted on the hotshoe of my Canon 60D, which has my general purpose 24-105mm f/4 L lens attached. I shot handheld for quick & dirty testing.

 

The Photos

A simple before and after shot. First without the grid, followed by a photo taken with the grid.

Note the even lighting. I used no other light modifier, like a gel, as there was no other ambient light - just the flash at 1/8 power.

 

 

 

For comparison, this photo is shot with the exact same settings, and the grid in place. Note how quickly the light falls off ! The grid directs the flash down a very narrow beam.


 

 

 

Lessons Learned

The use of a grid or snoot allows more creative use of light. It provides an easy way of selectively lighting a small portion of the frame, while quickly allowing the ambient light to light the rest. I see this as very useful for fill-flash and portraiture.

 

Project365 - Flash Light-Modifiers

Introduction
I have been noticing that I am often unhappy with the colours of my photographs when I shoot with a flash. While there is a white-balance setting on my camera, the light from the flash is a harsh white, which competes with other lighting in the photograph. There are a ton of ways to light scenes - you might be outside on a shady or sunny day. You might be interested in taking family portraits in the living room. Or perhaps you are doing commercial work, shooting products or Executives.

Seems that different lighting has different "temperatures" - you get a feel for it when you see pictures that appear to have a cool blue tinge, or ones that have a warm orange glow to them. Colour temperature is measured in terms of degrees Kelvin, and different lighting has different colours associated with them. Primarily, the objective is to get back to an "honest" white colour. Unless, of course, you WANT to create warmer or cooler tones in your photographs !


The Setup

It took me a bit of running around town, but I finally picked up the components I wanted. My preferred supplier, Saneal Cameras in Calgary, had the Honl speed strap at one store, and the gels at another. I bought a grid while I was at it, but we'll discuss that in a separate blog entry. I like the Honl system, because it makes quickly changing between gels and grids easy. The speed strap loops around the flash and then the components attach to the Velcro for a firm grip.

This isn't really a photo shoot, I was just messing around, attaching the gels & seeing what the effects are. I used my handy Canon 60D handheld, and affixed the 24-105mm f/4 L series lens. Around one of my Canon 430 EX II speed lights, I wrapped the Honl speed strap and started expeimenting. I have:

2X full Green gels (CTG ?)

1X full Blue gel (CTB)

1X half Blue gel (CTB)

2X full Orange gel (CTO)

2X half Orange gel (CTO)

2X quarter Orange gel (CTO)

 

The Photos

This photo was taken with a full green gel. If you compare to the other two pictures, everything has a sickly green colour. The kitchen was illuminated only by the light coming in the window. The green gels are to be used to colour-correct for fluorescent lighting.

 

 

This photo has the full blue gel applied to the flash. Can you see the difference ? I bet you can ! Note that the calendar (taking the top left corner) is white.

 

 

This photo was taken with the full orange gel applied to the flash. It's amazing the difference that the different gels make. Note that the wall beside/behind the refrigerator is a light beige colour.

 

 

 

So let's see the colour-correction in action. For the following two photos, I took shots of the window & door off of our dining area. The window and door are brilliant white, while the only light source is the tungsten (incandescent) chandelier overhead.

This photo was shot using the flash, but without any gel to modify the light source. See how there is an dingy yellow cast to it ?




Here is the same scene, only using the full orange gel. The whites look white again !





Lessons Learned

Photography is merely the task of capturing light. But when we need to add external light to a scene, such as a full-flash, we need to be careful to balance our flash against the ambient light in the scene. I will keep experimenting with flash photography, and use the gels accordingly. The aim is to improve the overall appearance of the photos.

 

Saturday, April 5, 2014

Project365 - Black Backdrop

Introduction
Today I learned much more about a technique I had attempted once before. Now that I better understood how it worked, I believe I am better able to put it to good use. You see, one of the things that most studio photographers invest in is backdrops. Often large rolls of seamless white or black paper, they allow the subject to be the true focus of the photograph. Who knew I was carrying a black backdrop around in my camera ?!?

It's truly a simple effect involving the use of flash (or sometimes called strobe) photography. Cameras have a maximum speed with which they can sync with the flash to achieve a nicely lit picture, it's usually around 1/250th of a second. Keeping that portion of the exposure triangle still, we next dial down the ISO (the sensitivity of the CCD) to 100. The only thing left that is adjustable is the aperture. All we do is close that down until a picture taken in the ambient light is completely black. Now, anything lit up by the flash will be nicely lit, while the background remains black.

The Setup

Nothing really complicated the Canon 60D, set at f/16, ISO 100, and a shutter speed of 1/250th of a second. The Cactus v5 was mounted in the hotshoe, so I could use the Canon 430EX II off-camera. I placed it on a basic tripod with the other Cactus v5, so I could move the light & the camera around freely.

The Photos

Believe it or not, this is a photo of Pat's flowers on the dining room table. I was setting the ISO, Aperture and shutter speed to get a black background. Got it !



 

Whoops ! The flash was spilling onto the background too much, so I elected to put a snoot on the flash, to more tightly focus the beam.




That's better ! Although you will notice the pen & paper on the tabletop still show up faintly. Now to play around a bit... ;-)



The first few pictures weren't as bright as I would have liked, so they came out a little dull. Time to up the power of the flash a notch, and move the light stand a little closer !




Much better ! I like the contrast created by the various petals on the flowers.


I think this is one of my favorite photographs of the shoot...





Lessons Learned

I thought I really understood this technique, but now with a little better tutorial, I think I know how to nail it whenever I need it. Certainly, implementing the snoot helped narrow the beam, and moving the light stand over to one side helped with not lighting the background. I really like this technique & see myself using it for portrait work.

 

Project365 - In the Kitchen

Introduction
Pat bought me a slab of Montréal Smoked Meat from Dunn's. It's an extra-special treat, bringing back memories of kosher dill pickles, beautiful rye bread, and tangy mustard. These were all shared with my father, whose laboratory at McGill was just a few short blocks from Dunn's famous delicatessen.

So todays's project was to slice it up & repackage it, so that we could enjoy it over a longer time. Unfortunately, we are also getting ready to move, so our meat-slicer is packed, but I know not where !

 

The Setup

Product shoots require a little bit of planning. Usually, you use a light-box, which helps create evenly diffused light on all surfaces of the product. I didn't want to lose the feeling that we were in the kitchen, so I decided to just shoot handheld, right on the cutting board

I used my trusty Canon 60D, and mounted my 40mm "pancake" lens. While it is capable of a nice wide aperture, I wasn't interested in a really shallow depth of field, so I shot it at about f/8. I also mounted a single Canon 430EX II on a Cactus v5 trigger, so that I could simply wash the ceiling & create a more natural light.

 

The Photos

So let's see how we did:

The smoked meat had a beautiful "marbled" effect. Montréalers will tell you, it must be served fatty & hot, so the fat runs out, releasing the flavour !


When the meat is cured, it is first rubbed with a wonderful medley of cracked pepper, which you can see here. Obviously, this shot is taken before we began slicing the meat.



While I wasn't able to shave it as close as I could have with the slicer, I still got nice thin slices. We then arranged them in stacks, so that they could be repackaged.




Lessons Learned

I spent a lot of time working out the lighting. I took a number of shots that I immediately discarded, as they looked so unnatural. I tried bouncing the light, dialling it down & aiming it slightly away, and I still couldn't get the look I was looking for. Finally, I decided "back to basics !" and washed the ceiling with light at about half power. Finally, it looked natural to me.

 

Sunday, March 30, 2014

Project365 - Second Curtain Flash

Introduction
The kids are over for the weekend, but the continual snow has everybody a little down. So what better to lift everybody's mood than a little RC Car racing ? Since the cars move on a set track, it's pretty straightforward to capture some of the action. It's also a great opportunity to try a new technique called Second Curtain Flash.

The idea is that under normal conditions the flash fires as the shutter opens, freezing the action. Then, depending on the shutter speed, the shutter closes again, finishing the shot. Second Curtain Shutter delays the flash until the shutter is about to close. So in slightly longer exposure shots, the effect is to capture some blur of movement, and then freeze the action with the flash.

The Setup

My trusty Canon 60D, with the venerable 24-105mm f/4 L lens. The Canon 430EX II flash is mounted on the hotshoe, and set to ETTL and Second Curtain Flash. In order to get the blur, the shutter was set to 1/4 second, aperture at f8, and the ISO at 125. I shot handheld, as I was down on the floor, on my belly to achieve the look I wanted.

The Photos

A little racing action sees the grey car passing the yellow car. The blue streaks are actually the Bluetooth indicator lights on top of the cars.



I really like how the yellow car blurs brightly. You get such a sense of speed from this effect !


Taken a little bit wider, both cars are in the frame. Unfortunately, there's not much contrast between the grey car's "blur" and the dark background. So it's not as good as I had hoped.




Lessons Learned

This was a quick little shoot - only a dozen or so photos. I like the effect, but have come to realize that it works best when you have high contrast between the background and the subject.

 

Wednesday, March 26, 2014

Project365 - Let's Go For a Drive !

Introduction
I have been thinking about this shoot for a while. I wanted to play with motion, but instead of having the subject crisp & everything else blurry - ala Bokeh - I wanted to capture the feeling of being in motion. After shooting the Auto Strobism shoot, I liked the setup in the car. And this gave me the idea for the shoot !

 

The Setup

This was a lot more of a complex setup than I expected. The idea was to mount the camera (Canon 60D), on the Manfrotto tripod in the back seat of the truck. In order to capture the entire windshield, as well as the occupants of the front seat, I switched to the Canon17-40mm f/4 wide-angle lens, and kept it at 17mm. I was worried about the stability of it all, so I looped the neck strap of the camera over the centre headrest. Finally, in order to get some light in the cabin, we set up the Canon 430EX II flash with my inflatable diffuser.

This photo (taken with my iPhone) shows the camera on the tripod, and the flash mounted in the hotshoe. As you can see, the iPhone camera really sucks in low-light conditions ! With the camera in the back seat, the setup was laborious - pull over, hop in the backseat, make adjustments, test shoot, refocus & start all over again !

 

 

 

 

 

 

In this side shot, you can see the shutter release cable dangling down from the camera body. Unfortunately, the cable is very short, so Pat had to hold her hand back behind her (out of the shot) to take the photos. She was an absolute trooper for staying in that position through 90 minutes and 270 shots !

 

 

 

 

 

 

 

The Photos

Here we are in the driveway. I knew I'd need to have some light inside the cabin, but we spent a few minutes figuring out the placement. At first, I thought off-camera would look good. I really didn't like how this looked at all - very unnatural !

 

 

Here is the first good shot - the cabin of the truck & passengers are reasonably lit, and in-focus. The outside is visible and somewhat blurry. The exposures were taken at 1 second, to enhance the feeling of motion.



This is actually one of my favorites. Most of the outside is blurry - look at the streaky headlights of the oncoming traffic ! But I was keeping pace with the car on our right, so it stayed reasonably in focus. This is the style I was after !


Man down ! Apparently, the rig wasn't as stable as I had hoped. I'm fortunate nothing got damaged as the tripod toppled over...




 

Occasionally, if we paused for too long, the flash would go into battery-saving mode, and not fire on the first shot. So we have about a dozen shots with no interior lighting.




This photo illustrates one of our challenges - how bumpy Calgary's roads are. The streak on the left is an oncoming car. The headlights waver up & down as the truck contends with the uneven road surface. That internal shake ruined quite a few shots entirely.



 

This photo was taken as we drove over the flyover into the downtown core. The exterior is blurred, giving the feeling of motion, while still focused enough to see where we are.



 

 

This is one of my favorite photos captured of the night's shoot. The passing traffic really conveys the feeling of movement. The viewer really feels like they are in the truck with us, driving through the city.

 

 

 

Lessons Learned

This was a complex shoot. I have to give a LOT of credit to my assistant, Pat. She not only fired off the 270 frames, but also had my iPad in her lap (out of sight of the camera) to validate we were getting the shots we wanted. The rigging of the camera in the backseat was OK - we really only toppled over twice in over 90 minutes of shooting. The shutter release cable is WAY too short - I think I am going to investigate a wireless option.

Over all, I am happy with the results. We captured about a dozen really cool photographs, which beautifully convey the feeling of motion. Let me know of you agree ! =D

 

Monday, March 24, 2014

Project365 - When You See It...

Introduction
I've been struggling to find my muse. There have been so many distractions, I'm afraid I can no longer really call this a 365 Project. Sigh... I must soldier on and keep shooting ! We are in the process of moving homes, and I was given the task of cleaning the jetted tub. You pour these crystals in, run the pumps, and they scour the internals of the pump and pipes. Then you drain the tub and refill, repeating the process to rinse the crystals out of the tub and it's internals.


The Setup

The ever-so-trusty Canon 60D, mounted with my Canon 24-105mm f/4 L lens. To brighten up the contrast, I mounted the hotshoe with a Canon 430EX II flash. I shot handheld, so I could get as close as I wanted.

The Photos

You can just make out the refraction of light around the drain. Do you see it ?

 

It may be a little less easy to discern in this photo...





I wanted to capture the vortex of water, created as it swirled down the drain. While the vortex wasn't so evident, the refraction of the light was !




 

Lessons Learned

This caught my eye & I decided to shoot. The challenge was that the water was SO clear, that I couldn't make out the funnel-shape I hoped. But the refraction of light bending the overall shape of the drain was wonderful ! Perhaps next time, I might try some light food colouring to the water.

 

Tuesday, March 11, 2014

Project365 - Studio Shoot

Introduction
I have been doing a lot more reading about how to set up a basic photography studio. It usually involves having multiple strobes, umbrellas or big soft-boxes, as well as a host of other tools. Being on a budget, I don't have a lot of those things. So I improvised !
The Setup
My Dad had an old Kodak Brownie Junior camera amongst his keepsakes. I thought it might make an interesting shoot - taking photographs of an antique camera ! Lacking a lightbox (although I have seen a YouTube video on how to make one inexpensively), I decided that a couple of flashes and some white paper carefully arranged on the dining room table might do the trick !
I mounted the Canon 24-105mm f/4 L lens onto my Canon 60D. I also used the Cactus v5 to trigger the flashes. One flash, at 1/4 power, was fitted with my inflatable diffuser & mounted on a small tripod. The other flash at 1/2 power was set to nuke the ceiling with bright light !
The Photos
I took quite a few photos, and the shoot lasted about 45 minutes as I played with my settings to get the sort of shots I wanted. Here are three of the best.
As you can see, the Brownie is a very simple camera, with a fixed lens. There's no focus or aperture settings here !








Note the Kodak name on the hand-strap ! At the bottom of the photograph, you can make out the winding mechanism for the film.




An interior shot highlights the lack of vanes on the shutter. It is a simple procedure to slide the shutter open & then closed. Really, there's not much to this beauty !























Lessons Learned
I enjoyed this shoot. I was faced with a number of challenges, including not being able to properly diffuse the light. But by bouncing one flash off the ceiling & using a diffuser on the other, I was able to properly light the subject without creating any harsh shadows. In a future entry, I want to build the lightbox I saw in the video, and see how well it works (or doesn't) .